code/__DEFINES/reactions.dm 
| PRIORITY_PRE_FORMATION | The prority used to indicate that a reaction should run immediately at the start of a reaction cycle. Currently used by a jumble of decomposition reactions and purgative reactions. |
|---|---|
| PRIORITY_FORMATION | The priority used for reactions that produce a useful or more advanced product. Goes after purgative reactions so that the purgers can be slightly more useful. |
| PRIORITY_POST_FORMATION | The priority used for indicate that a reactions should run immediately before most forms of combustion. Used by two decomposition reactions and steam condensation. |
| PRIORITY_FIRE | The priority used to indicate that a reactions should run after all other types of reactions. Exclusively used for combustion reactions that produce fire or are freon. |
| ATMOS_RADIATION_VOLUME_EXP | An exponent used to make large volume gas mixtures significantly less likely to release rads. Used to prevent tritfires in distro from irradiating literally the entire station with no warning. |
| GAS_REACTION_MAXIMUM_RADIATION_PULSE_RANGE | Maximum range a radiation pulse is allowed to be from a gas reaction. |
| WATER_VAPOR_CONDENSATION_POINT | The temperature required for water vapor to condense. |
| WATER_VAPOR_DEPOSITION_POINT | The temperature required for water vapor to condense as ice instead of water. |
| MIASTER_STERILIZATION_TEMP | The minimum temperature miasma begins being sterilized at. |
| MIASTER_STERILIZATION_MAX_HUMIDITY | The maximum ratio of water vapor to other gases miasma can be sterilized at. |
| MIASTER_STERILIZATION_RATE_BASE | The minimum amount of miasma that will be sterilized in a reaction tick. |
| MIASTER_STERILIZATION_RATE_SCALE | The temperature required to sterilize an additional mole of miasma in a reaction tick. |
| MIASTER_STERILIZATION_ENERGY | The amount of energy released when a mole of miasma is sterilized. |
| FIRE_CARBON_ENERGY_RELEASED | Amount of heat released per mole of burnt carbon into the tile |
| PLASMA_MINIMUM_BURN_TEMPERATURE | Minimum temperature to burn plasma |
| PLASMA_UPPER_TEMPERATURE | Upper temperature ceiling for plasmafire reaction calculations for fuel consumption |
| OXYGEN_BURN_RATIO_BASE | The maximum and default amount of plasma consumed as oxydizer per mole of plasma burnt. |
| PLASMA_OXYGEN_FULLBURN | Multiplier for plasmafire with O2 moles * PLASMA_OXYGEN_FULLBURN for the maximum fuel consumption |
| SUPER_SATURATION_THRESHOLD | The minimum ratio of oxygen to plasma necessary to start producing tritium. |
| PLASMA_BURN_RATE_DELTA | The divisor for the maximum plasma burn rate. (1/9 of the plasma can burn in one reaction tick.) |
| FIRE_PLASMA_ENERGY_RELEASED | Amount of heat released per mole of burnt plasma into the tile |
| HYDROGEN_MINIMUM_BURN_TEMPERATURE | The minimum temperature hydrogen combusts at. |
| FIRE_HYDROGEN_ENERGY_RELEASED | The amount of energy released by burning one mole of hydrogen. |
| HYDROGEN_OXYGEN_FULLBURN | Multiplier for hydrogen fire with O2 moles * HYDROGEN_OXYGEN_FULLBURN for the maximum fuel consumption |
| FIRE_HYDROGEN_BURN_RATE_DELTA | The divisor for the maximum hydrogen burn rate. (1/2 of the hydrogen can burn in one reaction tick.) |
| TRITIUM_MINIMUM_BURN_TEMPERATURE | The minimum temperature tritium combusts at. |
| FIRE_TRITIUM_ENERGY_RELEASED | The amount of energy released by burning one mole of tritium. |
| TRITIUM_OXYGEN_FULLBURN | Multiplier for TRITIUM fire with O2 moles * TRITIUM_OXYGEN_FULLBURN for the maximum fuel consumption |
| FIRE_TRITIUM_BURN_RATE_DELTA | The divisor for the maximum tritium burn rate. (1/2 of the tritium can burn in one reaction tick.) |
| TRITIUM_RADIATION_MINIMUM_MOLES | The minimum number of moles of trit that must be burnt for a tritium fire reaction to produce a radiation pulse. (0.01 moles trit or 10 moles oxygen to start producing rads.) |
| TRITIUM_RADIATION_RELEASE_THRESHOLD | The minimum released energy necessary for tritium to release radiation during combustion. (at a mix volume of CELL_VOLUME). |
| TRITIUM_RADIATION_RANGE_DIVISOR | A scaling factor for the range of radiation pulses produced by tritium fires. |
| TRITIUM_RADIATION_THRESHOLD | The threshold of the tritium combustion's radiation. Lower values means it will be able to penetrate through more structures. |
| FREON_MAXIMUM_BURN_TEMPERATURE | The maximum temperature freon can combust at. |
| FREON_LOWER_TEMPERATURE | Minimum temperature allowed for the burn to go at max speed, we would have negative pressure otherwise |
| FREON_TERMINAL_TEMPERATURE | Terminal temperature after which we stop the reaction |
| FREON_OXYGEN_FULLBURN | Multiplier for freonfire with O2 moles * FREON_OXYGEN_FULLBURN for the maximum fuel consumption |
| FREON_BURN_RATE_DELTA | The maximum fraction of the freon in a mix that can combust each reaction tick. |
| FIRE_FREON_ENERGY_CONSUMED | The amount of heat absorbed per mole of freon burnt. |
| HOT_ICE_FORMATION_MAXIMUM_TEMPERATURE | The maximum temperature at which freon combustion can form hot ice. |
| HOT_ICE_FORMATION_MINIMUM_TEMPERATURE | The minimum temperature at which freon combustion can form hot ice. |
| HOT_ICE_FORMATION_PROB | The chance for hot ice to form when freon reacts on a turf. |
| N2O_FORMATION_MIN_TEMPERATURE | The minimum temperature N2O can form from nitrogen and oxygen in the presence of BZ at. |
| N2O_FORMATION_MAX_TEMPERATURE | The maximum temperature N2O can form from nitrogen and oxygen in the presence of BZ at. |
| N2O_FORMATION_ENERGY | The amount of energy released when a mole of N2O forms from nitrogen and oxygen in the presence of BZ. |
| N2O_DECOMPOSITION_MIN_TEMPERATURE | The minimum temperature N2O can decompose at. |
| N2O_DECOMPOSITION_MAX_TEMPERATURE | The maximum temperature N2O can decompose at. |
| N2O_DECOMPOSITION_RATE_DIVISOR | The maximum portion of the N2O that can decompose each reaction tick. (50%) |
| N2O_DECOMPOSITION_MIN_SCALE_TEMP | One root of the parabola used to scale N2O decomposition rates. |
| N2O_DECOMPOSITION_MAX_SCALE_TEMP | The other root of the parabola used to scale N2O decomposition rates. |
| N2O_DECOMPOSITION_SCALE_DIVISOR | The divisor used to normalize the N2O decomp scaling parabola. Basically the value of the apex/nadir of (x - N2O_DECOMPOSITION_MIN_SCALE_TEMP) * (x - N2O_DECOMPOSITION_MAX_SCALE_TEMP). |
| N2O_DECOMPOSITION_ENERGY | The amount of energy released when one mole of N2O decomposes into nitrogen and oxygen. |
| BZ_FORMATION_MAX_TEMPERATURE | The maximum temperature BZ can form at. Deliberately set lower than the minimum burn temperature for most combustible gases in an attempt to prevent long fuse singlecaps. |
| BZ_FORMATION_ENERGY | The amount of energy 1 mole of BZ forming from N2O and plasma releases. |
| PLUOXIUM_FORMATION_MIN_TEMP | The minimum temperature pluoxium can form from carbon dioxide, oxygen, and tritium at. |
| PLUOXIUM_FORMATION_MAX_TEMP | The maximum temperature pluoxium can form from carbon dioxide, oxygen, and tritium at. |
| PLUOXIUM_FORMATION_MAX_RATE | The maximum amount of pluoxium that can form from carbon dioxide, oxygen, and tritium per reaction tick. |
| PLUOXIUM_FORMATION_ENERGY | The amount of energy one mole of pluoxium forming from carbon dioxide, oxygen, and tritium releases. |
| NITRIUM_FORMATION_MIN_TEMP | The minimum temperature necessary for nitrium to form from tritium, nitrogen, and BZ. |
| NITRIUM_FORMATION_TEMP_DIVISOR | A scaling divisor for the rate of nitrium formation relative to mix temperature. |
| NITRIUM_FORMATION_ENERGY | The amount of thermal energy consumed when a mole of nitrium is formed from tritium, nitrogen, and BZ. |
| NITRIUM_DECOMPOSITION_MAX_TEMP | The maximum temperature nitrium can decompose into nitrogen and hydrogen at. |
| NITRIUM_DECOMPOSITION_TEMP_DIVISOR | A scaling divisor for the rate of nitrium decomposition relative to mix temperature. |
| NITRIUM_DECOMPOSITION_ENERGY | The amount of energy released when a mole of nitrium decomposes into nitrogen and hydrogen. |
| FREON_FORMATION_MIN_TEMPERATURE | The minimum temperature freon can form from plasma, CO2, and BZ at. |
| FREON_FORMATION_ENERGY | The amount of energy 2.5 moles of freon forming from plasma, CO2, and BZ consumes. |
| NOBLIUM_FORMATION_MIN_TEMP | The maximum temperature hyper-noblium can form from tritium and nitrogen at. |
| NOBLIUM_FORMATION_MAX_TEMP | The maximum temperature hyper-noblium can form from tritium and nitrogen at. |
| NOBLIUM_FORMATION_ENERGY | The amount of energy a single mole of hyper-noblium forming from tritium and nitrogen releases. |
| REACTION_OPPRESSION_THRESHOLD | The number of moles of hyper-noblium required to prevent reactions. |
| HALON_FORMATION_ENERGY | Energy released per mole of BZ consumed during halon formation. |
| HALON_COMBUSTION_ENERGY | How much energy a mole of halon combusting consumes. |
| HALON_COMBUSTION_MIN_TEMPERATURE | The minimum temperature required for halon to combust. |
| HALON_COMBUSTION_TEMPERATURE_SCALE | The temperature scale for halon combustion reaction rate. |
| HALON_COMBUSTION_MINIMUM_RESIN_MOLES | Amount of halon required to be consumed in order to release resin. This is always possible as long as there's enough gas. |
| HALON_COMBUSTION_RESIN_VOLUME | The volume of the resin foam fluid when halon combusts, in turfs. |
| HEALIUM_FORMATION_MIN_TEMP | The minimum temperature healium can form from BZ and freon at. |
| HEALIUM_FORMATION_MAX_TEMP | The maximum temperature healium can form from BZ and freon at. |
| HEALIUM_FORMATION_ENERGY | The amount of energy three moles of healium forming from BZ and freon releases. |
| ZAUKER_FORMATION_MIN_TEMPERATURE | The minimum temperature zauker can form from hyper-noblium and nitrium at. |
| ZAUKER_FORMATION_MAX_TEMPERATURE | The maximum temperature zauker can form from hyper-noblium and nitrium at. |
| ZAUKER_FORMATION_TEMPERATURE_SCALE | The temperature scaling factor for zauker formation. At most this many moles of zauker can form per reaction tick per kelvin. |
| ZAUKER_FORMATION_ENERGY | The amount of energy half a mole of zauker forming from hypernoblium and nitrium consumes. |
| ZAUKER_DECOMPOSITION_MAX_RATE | The maximum number of moles of zauker that can decompose per reaction tick. |
| ZAUKER_DECOMPOSITION_ENERGY | The amount of energy a mole of zauker decomposing in the presence of nitrogen releases. |
| PN_FORMATION_MIN_TEMPERATURE | The minimum temperature proto-nitrate can form from pluoxium and hydrogen at. |
| PN_FORMATION_MAX_TEMPERATURE | The maximum temperature proto-nitrate can form from pluoxium and hydrogen at. |
| PN_FORMATION_TEMPERATURE_SCALE | The temperature scaling factor for proto-nitrate formation. At most this many moles of zauker can form per reaction tick per kelvin. |
| PN_FORMATION_ENERGY | The amount of energy 2.2 moles of proto-nitrate forming from pluoxium and hydrogen releases. |
| PN_HYDROGEN_CONVERSION_THRESHOLD | The amount of hydrogen necessary for proto-nitrate to start converting it to more proto-nitrate. |
| PN_HYDROGEN_CONVERSION_MAX_RATE | The maximum number of moles of hydrogen that can be converted into proto-nitrate in a single reaction tick. |
| PN_HYDROGEN_CONVERSION_ENERGY | The amount of energy converting a mole of hydrogen into half a mole of proto-nitrate consumes. |
| PN_TRITIUM_CONVERSION_MIN_TEMP | The minimum temperature proto-nitrate can convert tritium to hydrogen at. |
| PN_TRITIUM_CONVERSION_MAX_TEMP | The maximum temperature proto-nitrate can convert tritium to hydrogen at. |
| PN_TRITIUM_CONVERSION_ENERGY | The amount of energy proto-nitrate converting a mole of tritium into hydrogen releases. |
| PN_TRITIUM_CONVERSION_RAD_RELEASE_THRESHOLD | The minimum released energy necessary for proto-nitrate to release radiation when converting tritium. (With a reaction vessel volume of CELL_VOLUME) |
| PN_TRITIUM_RAD_RANGE_DIVISOR | A scaling factor for the range of the radiation pulses generated when proto-nitrate converts tritium to hydrogen. |
| PN_TRITIUM_RAD_THRESHOLD | The threshold of the radiation pulse released when proto-nitrate converts tritium into hydrogen. Lower values means it will be able to penetrate through more structures. |
| PN_BZASE_MIN_TEMP | The minimum temperature proto-nitrate can break BZ down at. |
| PN_BZASE_MAX_TEMP | The maximum temperature proto-nitrate can break BZ down at. |
| PN_BZASE_ENERGY | The amount of energy proto-nitrate breaking down a mole of BZ releases. |
| PN_BZASE_RAD_RELEASE_THRESHOLD | The minimum released energy necessary for proto-nitrate to release rads when breaking down BZ (at a mix volume of CELL_VOLUME). |
| PN_BZASE_RAD_RANGE_DIVISOR | A scaling factor for the range of the radiation pulses generated when proto-nitrate breaks down BZ. |
| PN_BZASE_RAD_THRESHOLD | The threshold of the radiation pulse released when proto-nitrate breaks down BZ. Lower values means it will be able to penetrate through more structures. |
| PN_BZASE_NUCLEAR_PARTICLE_DIVISOR | A scaling factor for the nuclear particle production generated when proto-nitrate breaks down BZ. |
| PN_BZASE_NUCLEAR_PARTICLE_MAXIMUM | The maximum amount of nuclear particles that can be produced from proto-nitrate breaking down BZ. |
| PN_BZASE_NUCLEAR_PARTICLE_RADIATION_ENERGY_CONVERSION | How much radiation in consumed amount does a nuclear particle take from radiation when proto-nitrate breaks down BZ. |
Define Details
ATMOS_RADIATION_VOLUME_EXP
An exponent used to make large volume gas mixtures significantly less likely to release rads. Used to prevent tritfires in distro from irradiating literally the entire station with no warning.
BZ_FORMATION_ENERGY
The amount of energy 1 mole of BZ forming from N2O and plasma releases.
BZ_FORMATION_MAX_TEMPERATURE
The maximum temperature BZ can form at. Deliberately set lower than the minimum burn temperature for most combustible gases in an attempt to prevent long fuse singlecaps.
FIRE_CARBON_ENERGY_RELEASED
Amount of heat released per mole of burnt carbon into the tile
FIRE_FREON_ENERGY_CONSUMED
The amount of heat absorbed per mole of freon burnt.
FIRE_HYDROGEN_BURN_RATE_DELTA
The divisor for the maximum hydrogen burn rate. (1/2 of the hydrogen can burn in one reaction tick.)
FIRE_HYDROGEN_ENERGY_RELEASED
The amount of energy released by burning one mole of hydrogen.
FIRE_PLASMA_ENERGY_RELEASED
Amount of heat released per mole of burnt plasma into the tile
FIRE_TRITIUM_BURN_RATE_DELTA
The divisor for the maximum tritium burn rate. (1/2 of the tritium can burn in one reaction tick.)
FIRE_TRITIUM_ENERGY_RELEASED
The amount of energy released by burning one mole of tritium.
FREON_BURN_RATE_DELTA
The maximum fraction of the freon in a mix that can combust each reaction tick.
FREON_FORMATION_ENERGY
The amount of energy 2.5 moles of freon forming from plasma, CO2, and BZ consumes.
FREON_FORMATION_MIN_TEMPERATURE
The minimum temperature freon can form from plasma, CO2, and BZ at.
FREON_LOWER_TEMPERATURE
Minimum temperature allowed for the burn to go at max speed, we would have negative pressure otherwise
FREON_MAXIMUM_BURN_TEMPERATURE
The maximum temperature freon can combust at.
FREON_OXYGEN_FULLBURN
Multiplier for freonfire with O2 moles * FREON_OXYGEN_FULLBURN for the maximum fuel consumption
FREON_TERMINAL_TEMPERATURE
Terminal temperature after which we stop the reaction
GAS_REACTION_MAXIMUM_RADIATION_PULSE_RANGE
Maximum range a radiation pulse is allowed to be from a gas reaction.
HALON_COMBUSTION_ENERGY
How much energy a mole of halon combusting consumes.
HALON_COMBUSTION_MINIMUM_RESIN_MOLES
Amount of halon required to be consumed in order to release resin. This is always possible as long as there's enough gas.
HALON_COMBUSTION_MIN_TEMPERATURE
The minimum temperature required for halon to combust.
HALON_COMBUSTION_RESIN_VOLUME
The volume of the resin foam fluid when halon combusts, in turfs.
HALON_COMBUSTION_TEMPERATURE_SCALE
The temperature scale for halon combustion reaction rate.
HALON_FORMATION_ENERGY
Energy released per mole of BZ consumed during halon formation.
HEALIUM_FORMATION_ENERGY
The amount of energy three moles of healium forming from BZ and freon releases.
HEALIUM_FORMATION_MAX_TEMP
The maximum temperature healium can form from BZ and freon at.
HEALIUM_FORMATION_MIN_TEMP
The minimum temperature healium can form from BZ and freon at.
HOT_ICE_FORMATION_MAXIMUM_TEMPERATURE
The maximum temperature at which freon combustion can form hot ice.
HOT_ICE_FORMATION_MINIMUM_TEMPERATURE
The minimum temperature at which freon combustion can form hot ice.
HOT_ICE_FORMATION_PROB
The chance for hot ice to form when freon reacts on a turf.
HYDROGEN_MINIMUM_BURN_TEMPERATURE
The minimum temperature hydrogen combusts at.
HYDROGEN_OXYGEN_FULLBURN
Multiplier for hydrogen fire with O2 moles * HYDROGEN_OXYGEN_FULLBURN for the maximum fuel consumption
MIASTER_STERILIZATION_ENERGY
The amount of energy released when a mole of miasma is sterilized.
MIASTER_STERILIZATION_MAX_HUMIDITY
The maximum ratio of water vapor to other gases miasma can be sterilized at.
MIASTER_STERILIZATION_RATE_BASE
The minimum amount of miasma that will be sterilized in a reaction tick.
MIASTER_STERILIZATION_RATE_SCALE
The temperature required to sterilize an additional mole of miasma in a reaction tick.
MIASTER_STERILIZATION_TEMP
The minimum temperature miasma begins being sterilized at.
N2O_DECOMPOSITION_ENERGY
The amount of energy released when one mole of N2O decomposes into nitrogen and oxygen.
N2O_DECOMPOSITION_MAX_SCALE_TEMP
The other root of the parabola used to scale N2O decomposition rates.
N2O_DECOMPOSITION_MAX_TEMPERATURE
The maximum temperature N2O can decompose at.
N2O_DECOMPOSITION_MIN_SCALE_TEMP
One root of the parabola used to scale N2O decomposition rates.
N2O_DECOMPOSITION_MIN_TEMPERATURE
The minimum temperature N2O can decompose at.
N2O_DECOMPOSITION_RATE_DIVISOR
The maximum portion of the N2O that can decompose each reaction tick. (50%)
N2O_DECOMPOSITION_SCALE_DIVISOR
The divisor used to normalize the N2O decomp scaling parabola. Basically the value of the apex/nadir of (x - N2O_DECOMPOSITION_MIN_SCALE_TEMP) * (x - N2O_DECOMPOSITION_MAX_SCALE_TEMP).
N2O_FORMATION_ENERGY
The amount of energy released when a mole of N2O forms from nitrogen and oxygen in the presence of BZ.
N2O_FORMATION_MAX_TEMPERATURE
The maximum temperature N2O can form from nitrogen and oxygen in the presence of BZ at.
N2O_FORMATION_MIN_TEMPERATURE
The minimum temperature N2O can form from nitrogen and oxygen in the presence of BZ at.
NITRIUM_DECOMPOSITION_ENERGY
The amount of energy released when a mole of nitrium decomposes into nitrogen and hydrogen.
NITRIUM_DECOMPOSITION_MAX_TEMP
The maximum temperature nitrium can decompose into nitrogen and hydrogen at.
NITRIUM_DECOMPOSITION_TEMP_DIVISOR
A scaling divisor for the rate of nitrium decomposition relative to mix temperature.
NITRIUM_FORMATION_ENERGY
The amount of thermal energy consumed when a mole of nitrium is formed from tritium, nitrogen, and BZ.
NITRIUM_FORMATION_MIN_TEMP
The minimum temperature necessary for nitrium to form from tritium, nitrogen, and BZ.
NITRIUM_FORMATION_TEMP_DIVISOR
A scaling divisor for the rate of nitrium formation relative to mix temperature.
NOBLIUM_FORMATION_ENERGY
The amount of energy a single mole of hyper-noblium forming from tritium and nitrogen releases.
NOBLIUM_FORMATION_MAX_TEMP
The maximum temperature hyper-noblium can form from tritium and nitrogen at.
NOBLIUM_FORMATION_MIN_TEMP
The maximum temperature hyper-noblium can form from tritium and nitrogen at.
OXYGEN_BURN_RATIO_BASE
The maximum and default amount of plasma consumed as oxydizer per mole of plasma burnt.
PLASMA_BURN_RATE_DELTA
The divisor for the maximum plasma burn rate. (1/9 of the plasma can burn in one reaction tick.)
PLASMA_MINIMUM_BURN_TEMPERATURE
Minimum temperature to burn plasma
PLASMA_OXYGEN_FULLBURN
Multiplier for plasmafire with O2 moles * PLASMA_OXYGEN_FULLBURN for the maximum fuel consumption
PLASMA_UPPER_TEMPERATURE
Upper temperature ceiling for plasmafire reaction calculations for fuel consumption
PLUOXIUM_FORMATION_ENERGY
The amount of energy one mole of pluoxium forming from carbon dioxide, oxygen, and tritium releases.
PLUOXIUM_FORMATION_MAX_RATE
The maximum amount of pluoxium that can form from carbon dioxide, oxygen, and tritium per reaction tick.
PLUOXIUM_FORMATION_MAX_TEMP
The maximum temperature pluoxium can form from carbon dioxide, oxygen, and tritium at.
PLUOXIUM_FORMATION_MIN_TEMP
The minimum temperature pluoxium can form from carbon dioxide, oxygen, and tritium at.
PN_BZASE_ENERGY
The amount of energy proto-nitrate breaking down a mole of BZ releases.
PN_BZASE_MAX_TEMP
The maximum temperature proto-nitrate can break BZ down at.
PN_BZASE_MIN_TEMP
The minimum temperature proto-nitrate can break BZ down at.
PN_BZASE_NUCLEAR_PARTICLE_DIVISOR
A scaling factor for the nuclear particle production generated when proto-nitrate breaks down BZ.
PN_BZASE_NUCLEAR_PARTICLE_MAXIMUM
The maximum amount of nuclear particles that can be produced from proto-nitrate breaking down BZ.
PN_BZASE_NUCLEAR_PARTICLE_RADIATION_ENERGY_CONVERSION
How much radiation in consumed amount does a nuclear particle take from radiation when proto-nitrate breaks down BZ.
PN_BZASE_RAD_RANGE_DIVISOR
A scaling factor for the range of the radiation pulses generated when proto-nitrate breaks down BZ.
PN_BZASE_RAD_RELEASE_THRESHOLD
The minimum released energy necessary for proto-nitrate to release rads when breaking down BZ (at a mix volume of CELL_VOLUME).
PN_BZASE_RAD_THRESHOLD
The threshold of the radiation pulse released when proto-nitrate breaks down BZ. Lower values means it will be able to penetrate through more structures.
PN_FORMATION_ENERGY
The amount of energy 2.2 moles of proto-nitrate forming from pluoxium and hydrogen releases.
PN_FORMATION_MAX_TEMPERATURE
The maximum temperature proto-nitrate can form from pluoxium and hydrogen at.
PN_FORMATION_MIN_TEMPERATURE
The minimum temperature proto-nitrate can form from pluoxium and hydrogen at.
PN_FORMATION_TEMPERATURE_SCALE
The temperature scaling factor for proto-nitrate formation. At most this many moles of zauker can form per reaction tick per kelvin.
PN_HYDROGEN_CONVERSION_ENERGY
The amount of energy converting a mole of hydrogen into half a mole of proto-nitrate consumes.
PN_HYDROGEN_CONVERSION_MAX_RATE
The maximum number of moles of hydrogen that can be converted into proto-nitrate in a single reaction tick.
PN_HYDROGEN_CONVERSION_THRESHOLD
The amount of hydrogen necessary for proto-nitrate to start converting it to more proto-nitrate.
PN_TRITIUM_CONVERSION_ENERGY
The amount of energy proto-nitrate converting a mole of tritium into hydrogen releases.
PN_TRITIUM_CONVERSION_MAX_TEMP
The maximum temperature proto-nitrate can convert tritium to hydrogen at.
PN_TRITIUM_CONVERSION_MIN_TEMP
The minimum temperature proto-nitrate can convert tritium to hydrogen at.
PN_TRITIUM_CONVERSION_RAD_RELEASE_THRESHOLD
The minimum released energy necessary for proto-nitrate to release radiation when converting tritium. (With a reaction vessel volume of CELL_VOLUME)
PN_TRITIUM_RAD_RANGE_DIVISOR
A scaling factor for the range of the radiation pulses generated when proto-nitrate converts tritium to hydrogen.
PN_TRITIUM_RAD_THRESHOLD
The threshold of the radiation pulse released when proto-nitrate converts tritium into hydrogen. Lower values means it will be able to penetrate through more structures.
PRIORITY_FIRE
The priority used to indicate that a reactions should run after all other types of reactions. Exclusively used for combustion reactions that produce fire or are freon.
PRIORITY_FORMATION
The priority used for reactions that produce a useful or more advanced product. Goes after purgative reactions so that the purgers can be slightly more useful.
PRIORITY_POST_FORMATION
The priority used for indicate that a reactions should run immediately before most forms of combustion. Used by two decomposition reactions and steam condensation.
PRIORITY_PRE_FORMATION
The prority used to indicate that a reaction should run immediately at the start of a reaction cycle. Currently used by a jumble of decomposition reactions and purgative reactions.
REACTION_OPPRESSION_THRESHOLD
The number of moles of hyper-noblium required to prevent reactions.
SUPER_SATURATION_THRESHOLD
The minimum ratio of oxygen to plasma necessary to start producing tritium.
TRITIUM_MINIMUM_BURN_TEMPERATURE
The minimum temperature tritium combusts at.
TRITIUM_OXYGEN_FULLBURN
Multiplier for TRITIUM fire with O2 moles * TRITIUM_OXYGEN_FULLBURN for the maximum fuel consumption
TRITIUM_RADIATION_MINIMUM_MOLES
The minimum number of moles of trit that must be burnt for a tritium fire reaction to produce a radiation pulse. (0.01 moles trit or 10 moles oxygen to start producing rads.)
TRITIUM_RADIATION_RANGE_DIVISOR
A scaling factor for the range of radiation pulses produced by tritium fires.
TRITIUM_RADIATION_RELEASE_THRESHOLD
The minimum released energy necessary for tritium to release radiation during combustion. (at a mix volume of CELL_VOLUME).
TRITIUM_RADIATION_THRESHOLD
The threshold of the tritium combustion's radiation. Lower values means it will be able to penetrate through more structures.
WATER_VAPOR_CONDENSATION_POINT
The temperature required for water vapor to condense.
WATER_VAPOR_DEPOSITION_POINT
The temperature required for water vapor to condense as ice instead of water.
ZAUKER_DECOMPOSITION_ENERGY
The amount of energy a mole of zauker decomposing in the presence of nitrogen releases.
ZAUKER_DECOMPOSITION_MAX_RATE
The maximum number of moles of zauker that can decompose per reaction tick.
ZAUKER_FORMATION_ENERGY
The amount of energy half a mole of zauker forming from hypernoblium and nitrium consumes.
ZAUKER_FORMATION_MAX_TEMPERATURE
The maximum temperature zauker can form from hyper-noblium and nitrium at.
ZAUKER_FORMATION_MIN_TEMPERATURE
The minimum temperature zauker can form from hyper-noblium and nitrium at.
ZAUKER_FORMATION_TEMPERATURE_SCALE
The temperature scaling factor for zauker formation. At most this many moles of zauker can form per reaction tick per kelvin.